32 Channel Ethernet GPIO Module With Analog Inputs
Numato’s 32 Channel Ethernet GPIO module is a low cost easily deployable solution for connecting your PC to other electronic circuitry through a network. This GPIO module can be accessed through a simple web interface or Telnet. Ease of use and wider operating system compatibility are the primary goals behind this product’s design. This simplicity allows the use of off-the-shelf Terminal Emulation programs such as HyperTerminal and TeraTerm for controlling the module with a simple set of human-readable commands through Telnet/Web page. For power users, this module can be controlled by writing programs in various programming languages.
Features
- 32 TTL (3.3V) compatible GPIOs available
- 14 Analog input channels (Multiplexed with GPIOs)
- 10 Bit Analog input resolution
- All GPIOs can be individually configured as input or output
- Can be controlled by using a simple web interface or Telnet
- No TCP/IP protocol knowledge required
- 2,25,8ma Source/Sink capacity(depend on the IOs).
- Microcontroller: Microchip PIC18F97J60(1-Mbit Flash Microcontroller with 10Mbps Ethernet communication peripheral).
- Memory: Microchip 25LC1024 serial EEPROM provides 1024 Kbits of storage for both web pages and nonvolatile configuration.
- MAC Address: Separate Serial EEPROM(24AA02E48) with Globally Unique value used as MAC Address for the device.
- Reset Jumper: Resets the board to factory defaults.
- Password-protected Web console and Telnet communication interface.
- LED indication for Power.
Applications
- Home Automation
- Lighting Control
- Garden Equipment Control
- Industrial Automation
- Test Fixtures
- DIY and Hobby
Reviews
There are no reviews yet.