Model |
DSO2D15 |
DSO2D10 |
DSO2C15 |
DSO2C10 |
Bandwidth |
150MHz |
100MHz |
150MHz |
100MHz |
Oscilloscope channels |
2CH |
2CH |
2CH |
2CH |
Waveform generator |
1CH |
1CH |
– |
– |
Oscilloscope |
Sample rate |
1GSa/s
(single channel) 500MSa/s (two channels) |
Acquisition |
Normal |
Sample
data |
Peak-to-peak value |
Display
high frequency and random burr |
Average |
Average
waveform, times: 4, 8, 16, 32, 64, 128 |
High resolution |
Up to
12bit |
Input |
Input coupling |
DC,
AC, GND |
Input impedance |
1MΩ±2%
‖20pF±3pF |
Probe attenuation factor |
1X,
10X, 100X, 1000X |
Voltage rating |
300V
CAT II |
Maximum input voltage |
300VRMS
(10X) |
Horizontal |
Waveform interpolation |
(sin
x)/x |
Maximum record length |
Single
channel maximum 8M |
Two channels maximum 4M |
Horizontal scale range |
2ns/div~100s/div
1, 2, 5 step by step |
Time base mode |
Y-T,
X-Y, Roll |
Zero offset |
±0.5
div×minimum time base gear |
Sample Rate and Delay Time Accuracy |
±25ppm |
Delta Time Measurement Accuracy (Full
Bandwidth)Sample Rate and Delay Time Accuracy |
single-shot,
Normal mode ±(1
sample interval+100ppm×reading+0.6ns) |
>16 times
averages ±(1
sample interval+100ppm×reading+0.4ns) |
Sample interval=sec/div÷200 |
Sample Rate and Delay Time Accuracy |
±50ppm(at
any interval greater than 1ms) |
Vertical |
Model |
DSO2D15 |
DSO2D10 |
DSO2C15 |
DSO2C10 |
Bandwidth |
150MHz |
100MHz |
150MHz |
100MHz |
Rising time in BNC position (typical) |
2.4ns |
3.5ns |
2.4ns |
3.5ns |
Vertical resolution |
8
bits resolution, each channel samples simultaneously |
Vertical sensitivity |
2mV/div
to 10V/div |
Offset range |
≥ 200mV/div, ±1V; |
<200mV/div
±50V |
Mathematical operation |
+, -,
×, ÷, FFT |
FFT |
Window:
Rectangle, Hanning, Hamming, Blackman, Bartlett, Flattop |
Bandwidth Limit |
20MHz |
Bass response(-3db) |
In
BNC position ≤ 10Hz |
Vertical gain accuracy |
In
”normal” or ”average” acquisition mode, the accuracy of
10V/div to 10mV/div is ±3%; |
In ”normal” or ”average” acquisition mode, the accuracy
of 5mV/div to 2mV/div is ±4% |
Note:
Bandwidth reduced to 6MHz when using a 1X probe |
Trigger |
Trigger type |
Edge, Pulse
width, Video, Slope, Overtime, Window, Pattern, Interval,
Under Amp, UART, LIN, CAN, SPI, IIC |
Trigger level range |
±5
divisions from the center of the screen |
Trigger mode |
Auto,
Normal, single |
Level |
CH1~CH2 |
±4
divisions from the center of the screen |
EXT(Only With AWG Model) |
0~3.3V |
Holdoff range |
8ns~10s |
Trigger level accuracy |
CH1~CH2 |
0.2
div×volts/div within ±4 divisions from the center of the screen |
EXT(Only With AWG Model) |
±(Set
value× 6%+40mV) |
Edge trigger |
Slope |
Rising
edge, falling edge, rising or falling edge |
Signal source |
CH1, CH2, EXT(Only With AWG Model) |
Pulse width trigger |
Polarity |
Positive
polarity, negative polarity |
Condition(When) |
<,
>, !=, = |
Signal source |
CH1~CH2, |
Pulse width range |
8ns ~
10s |
Accuracy |
8ns |
Video trigger |
Signal
standard |
NTSC,
PAL |
Signal source |
CH1~CH2 |
Synchronization |
Scanning
line, line number, odd field, even field, all field |
Slope trigger |
Slope |
rising,
falling |
Condition(When) |
<,
>, !=, = |
Signal source |
CH1 ~
CH2 |
Time range |
8ns ~
10s |
Accuracy |
8ns |
Overtime trigger |
Signal
source |
CH1~CH2, |
Polarity |
Positive
polarity, negative polarity |
Time range |
8ns ~
10s |
Accuracy |
8ns |
Window trigger |
Signal
source |
CH1~CH2 |
Pattern trigger |
Pattern |
0:
low level; 1: high level; X: ignore |
Level(signal source) |
CH1~CH2 |
Interval trigger |
Slope |
rising,
falling |
Condition(When) |
<,
>, !=, = |
Signal source |
CH1~CH2 |
Time range |
8ns ~
10s |
Accuracy |
8ns |
Under Amp trigger |
Polarity |
Positive
polarity, negative polarity |
Condition(When) |
<,
>, !=, = |
Signal source |
CH1~CH2 |
Time range |
8ns ~
10s |
Accuracy |
8ns |
UART trigger |
Condition(When) |
Start,
Stop, data, Parity ERR, COM ERR |
Signal source(RX/TX) |
CH1~CH2 |
Data format |
Hex
(hexadecimal) |
Data length |
1
byte |
Data bit width |
5
bit, 6 bit, 7 bit, 8 bit |
Odd-even check |
none,
odd, even |
Idle level |
high,
low |
Baud rate (optional) |
110 / 300 / 600 / 1200 / 2400 / 4800 / 9600 / 14400 / 19200 / 38400 / 57600 / 115200 / 230400 / 380400 / 460400
bit/s |
Baud rate(user-defined) |
300bit/s~334000bit/s |
LIN trigger |
Condition(When) |
Interval
field, synchronization field, ID field, synchronization error, identifier, ID
and data |
Signal source |
CH1~CH2 |
Data format |
Hex
(hexadecimal) |
Baud rate (optional) |
110 / 300 / 600 / 1200 / 2400 / 4800 / 9600 / 14400 / 19200 / 38400 / 57600 / 115200 / 230400 / 380400 / 460400
bit/s |
Baud rate(user-defined) |
300bit/s~334000bit/s |
CAN trigger |
Condition(When) |
Start
bit, remote frame ID, data frame ID, frame ID, data frame data, error frame,
all errors, ACK Error, overload frame |
Signal source |
CH1~CH2 |
Data format |
Hex
(hexadecimal) |
Baud rate (optional) |
10000,
20000, 33300, 500000, 62500, 83300, 100000, 125000, 250000, 500000, 800000,
1000000 |
Baud rate(user-defined) |
5kbit/s~1Mbit/s |
SPI trigger |
Signal
source |
CH1~CH2 |
Data format |
Hex (hexadecimal) |
Data bit width |
4, 8,
16, 24, 32 |
IIC trigger |
Signal
source (SDA/SCL) |
CH1~CH2 |
Data format |
Hex (hexadecimal) |
Data index |
0~7 |
When(condition) |
Start
bit, stop bit, No Ack, address, restart, address and data |
Measurement |
Cursor |
Voltage
difference between cursors △V |
Time difference between cursors △T |
Reciprocal of △T, in Hertz (1/△T) |
Auto measurement |
frequency,
period, mean, peak-to-peak, RMS, minimum, mixmum, rising time, falling time,
+ width, – width, base, top, middle, amplitude, overshoot, preshoot, rising
edge phase difference, falling edge phase difference, + duty, – duty, period
mean, PRMS, FOVshoot, ROVshoot, BWIDTH, FRF, FFR, LRR, LRF, LFR, LFF |
DVM |
Data
source |
CH1,
CH2 |
Measurement type |
DC
RMS |
AC RMS |
DC |
Frequency meter |
hardware
6 bits frequency meter |
Arbitrary
waveform generator |
Channel |
1 |
Sample rate |
200MSa/s |
Vertical resolution |
12
bits |
Maximum frequency |
25
MHz |
Standard waveforms |
sine,
square, ramp,Exp, noise, DC |
Arbitrary waveform |
Arb1,
Arb2, Arb3, Arb4 |
Sin |
Frequency
range |
0.1Hz~25MHz |
Square/pulse |
Frequency
range |
0.1Hz~10MHz |
Triangular wave |
Frequency
range |
0.1Hz~1MHz |
Sampling wave |
Frequency
range |
0.1Hz~1MHz |
Index |
Frequency
range |
0.1Hz~5MHz |
Noise |
|
Arb1 |
Frequency
range |
0.1
Hz to 10 MHz |
Arb2 |
Frequency
range |
0.1
Hz to 10 MHz |
Arb3 |
Frequency
range |
0.1
Hz to 10 MHz |
Arb4 |
Frequency
range |
0.1
Hz to 10 MHz |
Waveform length |
4KSa |
Frequency |
Accuracy |
100
ppm (<10 kHz) 50 ppm (>10 kHz) |
Resolution |
0.1
Hz or 4 bits,take the greater one |
Amplitude |
Output
range |
10mV~7Vp-p
(high impedance) |
5mV~3.5Vp-p (50Ω) |
DC offset |
Range |
±3.5
V, high impedance |
±1.75 V, 50 Ω |
Resolution |
100
μV or 3 bits, take the greater one |
Accuracy |
2% (1
kHz) |
Output impedance |
50 Ω |
General
specifications |
Display |
Display
type |
7” diagonal TFT liquid
crystal |
Display resolution |
800
(horizontal)*480 (vertical) pixels |
Display colour |
16
million colours (24 bits true colour) |
Persistence time |
minimum, 1
s, 5 s, 10 s, 30 s, infinite |
Display type |
dot,
vector |
Display brightness |
adjustable |
Grid type |
adjustable |
Grid brightness |
adjustable |
Interface |
Standard
interface |
USB
Host,USB Device |
General specifications |
Probe
compensator output |
Output voltage, typical |
about
2Vpp input ≥1MΩ load |
Frequency, typical |
1kHz |
Power supply |
100-120VACRMS(±10%), 45Hzto 440Hz,
CATⅡ |
120-240VACRMS(±10%), 45Hz to 66Hz, CATⅡ |
Power consumption |
<30W |
Fuse |
T,
3.15A, 250V, 5x20mm |
Operating temperature |
0~50
°C (32~122 °F) |
Storage temperature |
-40~+71
°C (-40~159.8 °F) |
Humidity |
≤+104℉(≤+40°C):
≤90% relative humidity |
106℉~122℉ (+41°C ~50°C): ≤60% relative humidity |
Altitude |
Operating
and nonoperating |
3,
000m (10, 000 feet) |
Mechanical shock |
Random
vibration |
0.31
g RMS from
50Hz to 500Hz, |
10 minutes on each axis |
Nonoperating |
2.46g RMS from 5Hz
to 500Hz, |
10 minutes on each axis |
Operating |
50g,
11ms, half-sine wave |
Mechanical |
Size |
318 x
110 x 150mm (length x width x height) |
Weight |
1900g |
Reviews
There are no reviews yet.